The Ultimate Cleaning Guide for YETI Products

The Ultimate Cleaning Guide for YETI Products

Keep your gear fresh and built to last

YETI products are made to withstand some serious wear and tear, but just like the rest of us, they’ll perform at their best when shown a bit of TLC! Whether it’s your trusty YETI cooler, tumbler, or water bottle, a regular clean keeps your gear fresh and free from lingering smells or stains.

Here’s the lowdown on how to keep your YETI items in top-notch condition, so they’re always ready for the next big adventure.

Cleaning Your YETI Cooler

Everyday Cleaning

Your cooler goes through a lot, so it’s good to give it a clean after each use. Here’s a quick, no-fuss way to do it:

  • What you'll need: Mild washing-up liquid, warm water, and a sponge or soft brush.
  • Steps: Empty the cooler, rinse it out with warm water, and scrub the inside with soapy water. Make sure to focus on seams and corners where grime likes to hide, especially where the drainage plug is. Give it a good rinse and leave it to air dry with the lid open.

Deeper Cleaning for Stains and Odours

If you’ve had some fish or BBQ spills in there, a quick clean may not be enough. Here’s a trick for stubborn smells and stains:

  • What you'll need: Some white vinegar, warm water and a sponge or soft brush.
  • Steps:Fill the cooler with a mix of warm water and a cup of white vinegar. Let this sit for 15-20 minutes to loosen up any stubborn stains or smells. Give it a scrub, rinse it thoroughly, and air dry. If your cooler is a bit whiffy, sprinkle it with baking soda (bi-card) and leave it for 30 minutes before giving it a good rinse.
  • Extra Tip: Occasionally, you can use a very diluted bleach solution (7 parts water to 1 part bleach) for tough jobs, but don’t do this too often to keep your cooler in prime condition.

Keeping Mould and Smells at Bay

The best way to prevent a YETI cooler from getting mouldy and smelly is to make sure it is completely dry before storing it. If possible, leave the lid slightly open for airflow, which will keep it fresh for the next use.

Cleaning Your YETI Tumbler

Everyday Cleaning

If you’re using your YETI tumbler daily for your coffee or tea fix, you’ll want to give it a quick clean after every use. The easiest way to do it? Pop it in the dishwasher. All YETI drinkware is dishwasher safe, just be sure to disassemble any parts first so that everything gets a good clean.

  • What you'll need: Warm water, washing-up liquid, and a bottle brush or sponge.
  • Steps: Warm water, washing-up liquid, and a bottle brush or sponge.

Deeper Cleaning

If you’ve noticed a bit of build-up or a lingering smell, try a deep clean:

  • Steps: Take apart all the various components and leave them to soak well. Once in a while, you can also fill the tumbler with a mixture of vinegar and water and let it sit for half an hour before rinsing.

 

Cleaning Your YETI Bottle

Everyday Cleaning

After using your YETI bottle, especially if it’s not just water you’re putting in it, a quick clean is ideal:

Steps:
    Rinse after every use and use a bottle brush to give the inside a scrub with warm soapy water.

Tackling Stains and Smells

If you’re dealing with a bit of an odour or can’t quite get rid of a stain, here’s a simple fix:

  • What you'll need: Warm water, baking soda.
    • Steps: Fill the bottle with warm water, add a tablespoon of baking soda, and give it a shake. Let it sit for 15 minutes, then rinse and dry thoroughly.

    Don't Forget the Lid and Cap

    Bottle lids and caps can easily build up residue, so take a minute to clean these too:

    • Steps: Remove the lid and scrub the threads, seals, and any other small areas with warm soapy water. You’ll be surprised how much fresher this keeps your bottle.

    General Tips For All YETI Products

    A bit of routine maintenance can keep all your YETI gear working its best

    • Check gaskets and steps: Keep an eye on the gaskets and seals for any wear and tear. Replacing these as needed helps maintain a tight seal.
    • Dry Before Storing: Ensure your YETI products are completely dry before storing them to avoid mould or mildew.
  • Avoid harsh chemicals: Stick to mild washing-up liquid for regular cleaning, and avoid heavy-duty bleach and abrasive scrubbers that could damage the finish.
  • FAQs

    • Can I put my YETI in the dishwasher? Yes, YETI tumblers and bottles are dishwasher safe, but generally, it’s best to hand wash for the longest life.
    • Dry Before Storing: Use a vinegar and baking soda solution, leave it to sit for 20 minutes, scrub, rinse, and let it dry with the lid open.
    • What should I avoid when cleaning YETI products: Avoid harsh chemicals like strong bleach or abrasive scrubbers, as they can damage the finish and seals.
    Back to blog